DesignRail® Rail Classic Kits Level and Stair Applications
Rail Kits contain the rails that run between the posts. Each kit includes a 6′ top and bottom rail, a pre-drilled intermediate picket and all necessary attachment hardware. Top and bottom rails can be trimmed to exact lengths and stair slope in the field. Use Rail Cut Kits if cutting a single Rail Kit for use in multiple smaller sections.
Aluminum components are made of high-quality 6000 series aluminum extrusions with AAMA 2604 powder-coated finishes for long lasting beauty and performance. Available in either Textured Black or Matte Black.
Level Rail Kits include:
- Top Rail
- Snap Cap
- Pre-drilled Intermediate Picket
- Bottom Rail
- Top Rail and Bottom Rail end plates
- Rail Connecting Brackets (RCBs) and hardware
Stair Rail Kits include:
- Top Rail
- Snap Cap
- Pre-drilled Intermediate Picket
- Bottom Rail
- Top Rail and Bottom Rail end plates
- Angle (enter degree) cut Rail Connecting Brackets (RCBs) and hardware
Level Rail Kits
36-in, Level, Black | (7724 BLK-PKG) |
36-in, Level, Textured Black | (7724 TBLK-PKG) |
42-in, Level, Black | (7609 BLK-PKG) |
42-in, Level, Textured Black | (7609 TBLK-PKG) |
Stair Rail Kits
36-in, Stair, Black | (7610 BLK-PKG) |
36-in, Stair, Textured Black | (7610 TBLK-PKG) |
Care and Maintenance
Feeney offers comprehensive care and maintenance documents categorized by material: one for stainless steel fittings and cables, and another for powder-coated aluminum products.
For best protection of CableRail, Feeney recommends using SteelRenewal™ and SteelProtect™, a stainless steel cleaner and protectant kit combo pack to help maintain your stainless steel surfaces.
FAQs
-
Can I install DesignRail® myself?
We engineer the DesignRail® aluminum railing system to be user-friendly. Basic carpentry skills and tools will accomplish most tasks. A good quality chop saw with a high-quality metal cutting blade is needed for cutting and mitering the aluminum extrusions. Be sure to check out our DesignRail® Railing Kits. They can make installations even easier.
-
How durable is the powder-coated finish?
Our finishes are applied in a new state-of-the-art powder-coating facility that achieves 2604 AAMA specs. In common terms this is a “marine grade” finish that performs well even in some of the harshest conditions. Plus, DesignRail® horizontal cable infill posts are drilled before they are powder coated, ensuring the powder coating is applied to the edge of the drill hole, which is another Feeney quality benefit!
-
What’s the longest cable run I can have?
When using our standard CableRail Kits, we recommend that straight runs of cable (no corners or bends) should not exceed 70 feet. Runs with corner bends (using double corner posts) should not exceed 40 feet and should not have more than two corners per run. Maximum run lengths may be less if using CableRail Conceal Kits or other Quick-Connect® or swage-type fittings. Give us a call to confirm the maximum run lengths for your specific project.