Partner Login 
Attractive and Economical
Meets Strength and Versatility
Feeney® stainless steel rods can be used in a variety of applications, including glass curtain walls, door canopy supports, guardrail balusters, and trellis infill grids. Rod assemblies support loads in both tension and compression conditions.
STAINLESS STEEL ROD
Custom cut and threaded to meet specific requirements of each job. Milled
wrench flats allow tools to grip the rod securely with minimal scratching.
316 STAINLESS STEEL
Made from type 316 stainless steel and comes in a satin finish. Minimum breaking loads are based on the core diameter of the thread.
UNF THREADS
Available in diameters to suit UNF threads 5/16″ to 1″ in size and lengths up to 12-feet using a single rod. Length can be extended using a rod connector.
| Rod Diameter | Part |
|---|---|
| 5/16″ | #1390 |
| 3/8″ | #1385 |
| 1/2″ | #1391 |
| 5/8″ | #1387 |
| 3/4″ | #1382 |
| 1″ | #1393 |
TENSION FORK
Each fork comes with a locking Conical Nut (CN) and Double Headed Pin. Using LH and RH threaded Tension Forks on a rod assembly alleviates the need for a turnbuckle and provides the most symmetrical design and economical method of tensioning.
316 STAINLESS STEEL
Made from type 316 stainless steel and comes in a satin finish. Designed to support the full load of the rods.
UNF THREADS
Available with left and righthand UNF threads 5/16″ to 1″ in size.
| Rod Diameter | R/L | Part |
|---|---|---|
| 5/16″ | Right Hand | #1305 |
| 3/8″ | Right Hand | #1310 |
| 1/2″ | Right Hand | #1315 |
| 5/8″ | Right Hand | #1320 |
| 3/4″ | Right Hand | #1325 |
| 1″ | Right Hand | #1330 |
| 5/16″ | Left Hand | #1306 |
| 3/8″ | Left Hand | #1311 |
| 1/2″ | Left Hand | #1316 |
| 5/8″ | Left Hand | #1321 |
| 3/4″ | Left Hand | #1326 |
| 1″ | Left Hand | #1331 |
ROD CONNECTOR
Used to link two rod sections together to extend lengths beyond 12 feet. Connectors are tapped left-hand (LH) threads on one end and right-hand (RH) threads on the other to ensure that assemblies will not unscrew during tensioning.
316 STAINLESS STEEL
Made from type 316 stainless steel and comes in a satin finish. Rod connectors are designed to support the full load of the rods.
UNF THREADS
Available to suit UNF threads 5/16″ to 1″ in sizes.
| Rod Diameter | Part |
|---|---|
| 5/16″ | #1338 |
| 3/8″ | #1340 |
| 1/2″ | #1342 |
| 5/8″ | #1344 |
| 3/4″ | #1346 |
| 1″ | #1348 |
ISOLATION WASHER
Used to eliminate direct contact of dissimilar metals, thereby minimizing the possibility of electrolysis when attaching Tension Forks to structural members.
STRENGTH AND DURABILITY
Made from nylon for extra high compression strength and durability. Washers are non-stock items and are only available by special order.
| Rod Diameter | Part |
|---|---|
| 5/16″ | #3155 |
| 3/8″ | #3401 |
| 1/2″ | #3402 |
| 5/8″ | #3403 |
| 3/4″ | #3404 |
| 1″ | #3405 |
ISLOATION SLEEVE
Used to eliminate direct contact of dissimilar metals, thereby minimizing the possibility of electrolysis when attaching Tension Forks to structural members.
STRENGTH AND DURABILITY
Made from glass-filled nylon for extra high compression strength and durability. Isolation Sleeves are non-stock items and are only available by special order.
| Rod Diameter | Part |
|---|---|
| 5/16″ | #3154 |
| 3/8″ | #3406 |
| 1/2″ | #3407 |
| 5/8″ | #3408 |
| 3/4″ | #3409 |
| 1″ | #3410 |
Feeney is an extension of your design team, with dedicated estimators supporting you every step of the way. Our seasoned experts collectively bring years of experience in the railing industry, standing ready to assist.
Count on our team to generate all essential project drawings; simply utilize our straightforward quote form to get started.
